News

During a heatwave, the fabric of your scrubs becomes more important than it seems. For long shifts, it's not enough for a uniform to look professional; it also needs to feel light, allow movement, and prevent moisture from getting trapped for hours. The short answer is this: for hot days, a light, breathable, relatively quick-drying fabric with moderate stretch usually feels cooler. In practice, this is often found in technical blends for medical uniforms, not necessarily in thick cotton or low-quality, rigid polyester. This article discusses textile comfort, not medical prevention. Cool scrubs can help make a shift more bearable, but they do not replace hydration, rest, ventilation, and symptom monitoring recommendations from health authorities, Civil Protection, or the National Meteorological Service. Why scrubs feel hotter on a long shift The sensation of heat doesn't just depend on the outside temperature. In a clinic, hospital, dental office, medical spa, or laboratory, constant movement, lighting, transfers between areas, wearing a lab coat or additional equipment, and the frequency with which the uniform is washed also play a role. Scrubs can feel hot for several reasons: heavy fabric, poor air circulation, too-tight cut, overly loaded pockets, or a fabric that absorbs sweat and takes a long time to dry. Therefore, when someone asks what the best fabric for a surgical uniform is in hot weather, it's worth looking beyond the material's name. Even if you're looking for fabric for surgical uniforms, two garments can say "polyester" or "cotton" and feel very different if the thickness, weave, finish, and fit change. What characteristics a cool fabric should have For long shifts in the heat, look for four things: lightweight, breathability, practical drying, and controlled stretch. A thick fabric might look structured, but if it retains too much heat, it becomes uncomfortable halfway through the shift. A breathable fabric doesn't "cool" by itself, but it prevents the trapped feeling of some very dense fabrics. Drying also matters. In heat, the problem isn't just sweating, but staying in a damp garment for hours. And while a little stretch helps you move without pulling, a too-tight uniform can feel hotter if it doesn't allow air to circulate. Quick comparison of scrub fabrics in heat This table summarizes how different options usually feel. It doesn't replace checking the product sheet, but it helps make decisions faster. Fabric type or blend Feel in heat Main advantage Point to check Thick cotton May feel cool initially, but retains moisture Natural feel If wet with sweat, may take a long time to dry Rigid polyester May feel stuffy if the fabric is heavy Durability Not rough, thick, or unbreathable Light blend with rayon or viscose Usually feels soft and more fluid Better drape and cool feel Check durability and washing care Blend with spandex or elastane Comfortable for movement Freedom of movement Avoid overly tight cuts Lightweight and breathable fabric Good option for long shifts Balance between coolness and daily use Confirm it is not transparent or fragile Fabric with repellent finish Useful in certain work environments Helps with minor splashes depending on the garment May feel less ventilated if the fabric is very dense The best choice is usually not a single fiber, but a balance between weave, weight, fit, and washing routine. Cotton: comfortable, but not always the coolest for work Cotton has a good reputation because it feels natural. The problem arises when the shift is long, there's a lot of movement, and the garment gets damp: it can absorb sweat, take longer to dry, and feel heavy or sticky against the body. If you choose cotton, it should not be too thick, and the cut should allow ventilation. For intense heat, many people prefer blends that dry better. Polyester and technical blends: depends heavily on quality Polyester should not be evaluated as a single category. There are heavy and uncomfortable fabrics, but also light blends for work uniforms, with better resistance, fewer wrinkles, and more practical drying. For scrubs in hot weather, the question shouldn't just be "does it have polyester?", but rather: does the fabric feel light? Does it allow movement? Does it stick to the body? Does it maintain a professional appearance after several washes? For those looking for what material is best for medical uniforms, a light blend may make more sense than a pure fiber. In clinical uniforms, balance matters more than the material's name. Stretch helps, but the cut also matters Elasticity can make a big difference. If your scrubs allow you to move without tension in your shoulders, back, waist, and knees, the heat feels less burdensome because you're not fighting with the garment. Even so, stretch doesn't solve everything. In hot weather, it's a good idea to leave a little functional space to move, sit, walk quickly, and carry instruments without the fabric sticking too much. What fabric is suitable depending on the type of work For nursing, where there is often constant movement, a light, breathable fabric with good recovery is suitable. If the uniform has pockets, check that they don't deform the garment when you carry pens, a cell phone, scissors, or cards. For doctors, students, or beauty clinics, presentation also matters. A fabric with good drape, that doesn't wrinkle easily, and that allows a lab coat to be worn over it without feeling heavy, usually works better than a very thin but unstructured fabric. How to care for scrubs to keep them comfortable Freshness also depends on care. Scrubs that initially felt light can lose comfort if washed incorrectly, accumulate detergent residue, or become stiff after drying. To wash surgical uniforms, always follow the care label. Avoid excessive fabric softener if it makes the fabric heavy, separate colors, and let the garment dry completely before storing it. If you work in hot weather, it can be helpful to rotate more than one uniform so that each garment can be washed and dried properly. So, what fabric feels coolest? For long shifts during a heatwave, a light, breathable, quick-drying blend with moderate stretch usually feels coolest. It doesn't have to be the thinnest fabric on the market, because it also needs to maintain coverage, structure, and a professional appearance. If you're comparing scrubs, feel the fabric, check the thickness, observe the drape, test the movement in the shoulders and knees, and think about your actual shift: how many hours you work, if you wear a lab coat over it, if you walk a lot, and how many times you wash the uniform per week. The coolest garment is not the one that promises the most, but the one that maintains comfort, mobility, and a professional appearance when the heat has been on for several hours. Current news To follow the 2026 heatwave in Mexico, it is advisable to check updated warnings from the National Meteorological Service and recommendations from Civil Protection or the Ministry of Health. This guide focuses solely on the textile choice for scrubs and does not replace labor protocols or health recommendations.

El algodón 100% presenta cuatro limitaciones críticas en climas húmedos: se satura de humedad y tarda demasiado en secar, acelera la proliferación bacteriana cuando está húmedo, pierde forma tras lavados frecuentes y no ofrece barrera efectiva ante líquidos clínicos. Para un profesional de la salud que trabaja jornadas largas en ambientes cálidos y húmedos, estas limitaciones se traducen en incomodidad real, mayor riesgo higiénico y mayor gasto en reposición de prendas. Por qué el algodón parece ideal pero no lo es en clínica El algodón tiene una reputación bien ganada en otros contextos: es suave, natural y transpirable en condiciones secas. El problema aparece cuando se combina con humedad ambiental elevada y la actividad física constante propia del trabajo clínico. En climas húmedos, el aire ya contiene una cantidad considerable de vapor de agua. Cuando a eso se suma el sudor generado durante una guardia, el algodón alcanza rápidamente su punto de saturación. A partir de ese momento, deja de cumplir su función y se convierte en una prenda pesada, pegajosa y lenta para secar. Limitación 1: absorción excesiva y secado lento La fibra de algodón puede absorber hasta el 27 veces su peso en agua. En condiciones de humedad alta, esto significa que el uniforme médico de algodón se empapa con relativa facilidad y, una vez húmedo, puede tardar horas en secarse completamente. Para el médico, la enfermera o el técnico que lleva puesto ese uniforme durante seis, ocho o doce horas, la sensación de prenda húmeda pegada al cuerpo genera fatiga física anticipada, irritación en la piel y una incomodidad sostenida que afecta la concentración y el rendimiento durante el turno. Limitación 2: mayor proliferación bacteriana La humedad retenida en la tela crea condiciones ideales para la multiplicación de microorganismos. Las bacterias prosperan en ambientes cálidos y húmedos, y un uniforme médico de algodón saturado de sudor en un clima húmedo ofrece exactamente ese entorno. Esto tiene implicaciones directas para la bioseguridad. Un uniforme que retiene humedad durante horas no solo es incómodo, también puede convertirse en un reservorio de bacterias que aumenta el riesgo de contaminación cruzada en el entorno clínico. En contextos donde la higiene es una prioridad no negociable, este factor cobra especial relevancia. Limitación 3: deformación y deterioro con el lavado frecuente Los uniformes médicos se lavan con una frecuencia mucho mayor que la ropa de uso cotidiano. El algodón 100%, especialmente cuando se lava a temperaturas necesarias para la desinfección, tiende a: Encoger tras los primeros lavados, alterando el tallaje y el ajuste original Perder forma en zonas de mayor tensión como rodillas, codos y cintura Decolorarse progresivamente, afectando la presentación profesional del uniforme Desgastarse en las costuras y bordes con mayor rapidez que los tejidos técnicos Este deterioro acelerado obliga a reemplazar los uniformes con mayor frecuencia, lo que representa un costo adicional que muchos profesionales subestiman al momento de la compra inicial. Limitación 4: baja resistencia ante líquidos clínicos En el entorno clínico, los uniformes médicos están expuestos a salpicaduras de soluciones antisépticas, fluidos corporales y productos de limpieza. El algodón 100% absorbe estos líquidos en lugar de repelerlos, lo que permite que penetren la prenda y lleguen a la piel del profesional. Esta característica no solo es incómoda, también representa un riesgo de exposición a agentes que el uniforme debería contener. Los tejidos técnicos modernos incorporan tratamientos antiflúido que actúan como barrera, evitando que los líquidos atraviesen la tela. Qué tela funciona mejor en climas húmedos Las mezclas de poliéster con elastano de alta densidad ofrecen un rendimiento superior al algodón en climas húmedos por varias razones: Secado rápido: las fibras sintéticas no retienen la humedad de la misma manera que el algodón, lo que permite que el sudor se evapore con mayor velocidad Menor proliferación bacteriana: al secar más rápido, el tejido permanece menos tiempo en el estado húmedo que favorece el crecimiento microbiano Estabilidad dimensional: mantienen su forma y talla tras lavados repetidos a distintas temperaturas Propiedades antiflúido: actúan como barrera ante salpicaduras y líquidos clínicos En JelriSoFit, los uniformes quirúrgicos están confeccionados con telas técnicas que combinan estas propiedades, diseñadas específicamente para el ritmo y las condiciones del trabajo clínico diario. En climas cálidos y húmedos, esta diferencia se siente desde las primeras horas del turno. La tela correcta es parte del equipo de trabajo Elegir el material del uniforme médico no es una decisión menor. En climas húmedos, optar por algodón 100% significa aceptar incomodidad progresiva, mayor riesgo higiénico y un ciclo de reposición más corto. Las telas técnicas no solo resuelven estas limitaciones, también convierten al uniforme en una herramienta que acompaña al profesional durante toda la jornada sin convertirse en una carga.

The weight of the fabric, measured in grams per square meter (GSM), is a fundamental indicator that reveals the density and thickness of the fabric used in your medical uniforms. Understanding the GSM of scrubs not only helps you anticipate the feel and drape of the garment, but it's also crucial for choosing the option that best suits your needs for comfort, durability, and functionality in your demanding daily work. It's a key metric for making an informed decision. Understanding GSM: Beyond a Simple Number GSM is a universal measurement that quantifies the weight of one square meter of fabric in grams. In the context of scrubs, a higher GSM value generally means a denser, thicker, and therefore heavier fabric. Conversely, a lower GSM indicates a lighter and often thinner fabric. However, it's not just about weight; GSM directly influences aspects such as breathability, opacity, wear resistance, and how the garment feels against the skin. Low GSM (120-160 GSM): Lightweight and Breathable Scrubs with a low GSM are designed to offer maximum lightness and excellent breathability. They are ideal for warm work environments or for professionals who perform very active tasks and need the greatest possible freedom of movement. Features: Lightweight feel, increased airflow, quick drying. Advantages: Great comfort in warm climates, minimal restriction of movement, less sweat accumulation. Considerations: They may be less tear-resistant, might require more care to avoid wrinkles, and opacity could be a factor to consider in light colors. Ideal uses: Emergency areas, clinics in tropical regions, nurses with high-activity shifts. GSM Medium (160-200 GSM): The Perfect Balance Most general-purpose scrubs fall within this GSM range. They offer an optimal balance of durability, comfort, and breathability, making them versatile for a wide range of medical settings. Features: Balance between lightness and substance, good resistance to daily use. Advantages: Adequate durability for frequent washing, generally good opacity, comfort in most climates. Considerations: They are not as lightweight as low GSM phones nor as robust as high GSM phones. Ideal uses: General practice, administrative staff, hospital environments with controlled temperatures. GSM High (200+ GSM): Durability and Protection Scrubs with a high GSM are characterized by their greater weight and density. They tend to feel more robust and offer greater wear resistance, making them suitable for environments where durability is a priority. Features: Thicker fabric, more structured feel, greater durability. Advantages: High durability, excellent opacity, greater protection in certain environments, and they can offer more warmth. Considerations: Less breathable, they may feel warmer in environments without air conditioning, and could slightly restrict movement if not combined with stretch fabrics. Ideal uses: Operating rooms (depending on the type of fabric and requirements), veterinary clinics, or areas where additional protection is required. GSM and Fabric Type: A Crucial Combination It's important to remember that GSM (grams per square meter) doesn't act in isolation. The fabric composition (cotton, polyester, rayon, spandex, etc.) interacts directly with the GSM to determine the final properties of the scrub. For example, a 180 GSM cotton scrub will feel different from a 180 GSM polyester scrub. Modern blends are designed to maximize the advantages: a medium-to-high GSM scrub that includes spandex, for example, can offer durability and structure without sacrificing elasticity and freedom of movement. Stretch and drape are attributes that depend on both GSM and fiber. Practical Tips for Choosing Your Scrubs According to GSM Selecting the right scrub goes beyond aesthetics; it involves understanding how the GSM aligns with your daily needs. Consider your work environment Consider the average temperature of your workplace. If you work in a warm climate or a hospital with high ambient temperatures, a low GSM will keep you cooler. For cooler or drafty environments, a medium to high GSM might be more comfortable. Evaluate your Activity Level If your role involves a lot of movement, bending, or stretching, a lower GSM or a medium GSM with a high spandex content will offer you greater freedom of movement. If your job is more sedentary, a higher GSM could be perfectly comfortable and offer greater wrinkle resistance. Think about the necessary durability. Scrubs are heavy-duty garments that are washed frequently. If you're looking for a long-term investment, a medium to high GSM fabric, especially in polyester blends, will offer greater resistance to wear and pilling. Prioritize Personal Comfort Some professionals prefer the light, airy feel of a low GSM scrub, while others value the robustness and greater protection offered by a high GSM scrub. Try different options to discover your preference. Check the Opacity For light-colored scrubs, a lower GSM rating can sometimes compromise opacity. If this is a concern, look for options with a medium or high GSM rating to ensure adequate coverage, or choose darker colors with a lower GSM rating. Pay Attention to the Season Many professionals choose to have different scrubs for each season: those with lower GSM for summer and those with higher GSM or warmer fabric for winter, thus maximizing comfort throughout the year. Common Myths About GSM in Scrubs There are some misconceptions about GSM that are important to clarify in order to make informed decisions. Myth 1: Higher GSM always means better quality. This isn't necessarily true. A higher GSM indicates a denser, heavier fabric, but the "quality" of a scrub also depends on the fiber quality, weave, finish, stitching, and overall design. A low GSM scrub made with high-quality fibers and excellent workmanship can be superior to a high GSM scrub with poor materials and workmanship. Myth 2: A low GSM is fragile. While historically lighter fabrics could be less durable, advances in textile technology have led to the development of low GSM fabrics that are surprisingly strong. The use of synthetic fibers and innovative blends gives these fabrics great durability without adding weight. Myth 3: GSM is the only thing that matters for convenience. Comfort in scrubs depends on several factors: the GSM (grams per square meter), yes, but also the type of fiber (natural vs. synthetic), the presence of spandex for elasticity, and the garment's cut and fit. A scrub might have the ideal GSM for you, but if the cut isn't right or the fabric lacks the necessary stretch, it won't be very comfortable. Understanding the meaning of GSM in scrubs empowers you as a professional to choose uniforms that not only look good, but also withstand the demands of your profession, optimizing your comfort and performance every day.

Most scrubs or medical uniforms are designed without buttons primarily for reasons of hygiene, safety, and functionality in clinical settings. The absence of buttons minimizes bacterial buildup, facilitates more effective cleaning and disinfection, prevents snagging and tearing, and ensures maximum comfort and mobility for healthcare professionals. Hygiene and Infection Control: The Absolute Priority In any medical setting, preventing cross-infection is of vital importance. Buttons, although they may seem harmless, present several disadvantages from a hygiene perspective: Irregular Surfaces: Buttons create small nooks and crannies where microorganisms, bodily fluids, and particles can lodge and be difficult to remove completely during washing. Buttonholes and seams are vulnerable points. Easy Cleaning: A smooth, buttonless design allows the scrubs to be washed and disinfected much more efficiently. The fabric can be fully exposed to cleaning agents, significantly reducing the risk of pathogen retention. This is crucial for complying with strict biosafety protocols. Inert Materials: Buttons, often made of plastic or metal, can react differently to industrial washing cycles or certain disinfectants, potentially compromising their integrity or that of the surrounding fabric. Safety and Comfort in Demanding Work Environments Beyond hygiene, functionality and the safety of medical personnel are key aspects in the design of scrubs. Prevention of Entanglements and Injuries In a dynamic environment like a hospital or clinic, where professionals are constantly moving among equipment, patients, and furniture, buttons can pose a risk. They can easily snag on objects, cables, or even the patient, causing clothing tears, interruptions, or, in the worst-case scenario, falls or injuries. A buttonless design reduces these risks, promoting a safer working environment. Easy to Put On and Take Off Healthcare professionals often need to put on and take off their scrubs quickly, whether at the beginning or end of their shift, or in emergency situations. A buttonless scrub allows for quick and easy changing. V-neck or crew neck designs, along with stretch fabrics, facilitate this process without requiring any additional manipulation. Mobility and Flexibility The nature of medical work demands a wide range of movements: bending, reaching, lifting, and twisting. Buttons can restrict movement and cause discomfort by pressing against the skin or equipment. The absence of buttons ensures greater freedom of movement, which is essential for performing complex tasks accurately and without distractions. Durability and Simplified Maintenance The buttonless design contributes to the longevity and ease of maintenance of the scrubs, which represents an economic and practical advantage. Fewer Failure Points: Buttons are elements that can come loose, break, or detach with repeated use and intensive washing. Eliminating buttons reduces the number of failure points on the garment, extending its lifespan. Industrial Wash Resistance: Scrubs are subjected to industrial and high-temperature washing cycles that are harsh on fabrics and accessories. A buttonless design better withstands this type of processing, maintaining its shape and functionality for longer without the need for frequent repairs. Long-Term Cost Reduction: Being more durable and requiring less maintenance, buttonless scrubs represent a more cost-effective long-term investment for medical institutions and the professionals themselves. Practical Design and Evolution of the Medical Uniform The evolution of medical uniforms has consistently prioritized functionality over complex aesthetics. The current design of scrubs is the result of decades of experience and adaptation to the specific needs of the clinical environment. The desired garment is: Standard and Uniform: A consistent and simple design facilitates mass production, inventory management, and ensures that all professionals have access to appropriate clothing. Functional: Every element of the scrub is designed for a practical purpose, and the absence of buttons aligns with this principle. Adaptable: The basic, unadorned designs are easily adaptable to different sizes and body types, and can be complemented with jackets or accessories if necessary, without compromising the main function of the scrub. Alternatives and Considerations for the User Although buttons are rare on the top of scrubs, other closure or design options exist for other medical garments or specific needs. Common Types of Closures Zippers: Although less common on the main tops of scrubs for the same hygiene and safety reasons, they are occasionally used on scrub jackets or outer garments that are not in direct contact with the patient in sterile areas. These zippers are usually made of plastic to prevent corrosion and facilitate cleaning. Snap Fasteners: Some lab coats or jackets may have snap fasteners. These are easier to clean than traditional buttons, but can still pose a small risk of snagging or buildup if not designed correctly. Closureless Designs: Most scrub tops simply slip over your head, with V-necks or crew necks that fit snugly without any fasteners. This is the cleanest and most practical solution. Choice according to Specialty and Environment When choosing scrubs, it is helpful to consider the type of environment and daily tasks. High Risk or Surgical Environments: In areas where asepsis is critical, scrubs should be as smooth and unadorned as possible to minimize any surfaces that could harbor pathogens. Administrative or Low-Risk Clinical Roles: For roles that do not involve direct contact with body fluids or sterile areas, considerations can be a little more flexible, but comfort and durability remain priorities. Importance of Fabric and Fit Beyond the presence or absence of buttons, the choice of a scrub should prioritize: Fabric Composition: Opt for stain-resistant fabrics that allow perspiration to escape and can withstand frequent washing without deteriorating. Polyester and spandex blends are popular for their durability and elasticity. Antimicrobial Properties: Some fabrics incorporate antimicrobial technologies that offer an additional layer of protection against bacterial growth. Proper Fit: A well-fitting scrub (not too loose and not too tight) allows complete freedom of movement without hindering and reduces the risk of snagging. The preference for buttonless scrubs is a testament to the healthcare industry's commitment to safety, hygiene, and efficiency. Understanding this rationale helps professionals select the most appropriate clothing for their demanding daily work.

Yes, scrubs with elastic cuffs on the sleeves do exist , and their presence responds to very specific needs within the clinical environment. This type of design is primarily used to improve hygiene, comfort, and control during procedures where contact and constant movement are common. Elastic cuffs are not an aesthetic element, but a functional solution designed for the daily work of healthcare personnel. Why do some scrubs have elastic cuffs? In certain clinical areas, loose sleeves may be impractical. Elastic cuffs help to: Keep sleeves in place Reduce accidental contact with surfaces Facilitate procedures that require precision Improve the sense of order and control For this reason, this type of design is becoming increasingly common in complementary garments such as jackets or medical gowns. Practical advantages of elastic cuffs in clinical work The use of elastic cuffs provides clear benefits in everyday life: Improved hygiene by preventing the sleeve from rubbing against unwanted areas Comfort during repetitive movements Secure fit without the need to constantly roll up sleeves Better adaptation to different types of arms These advantages are especially noticeable during long days and dynamic tasks. On which garments is this design most common? Although not all scrubs include elastic cuffs, this detail appears more frequently in: Medical jackets Clinical gowns Uniform outer garments In the case of complete sets, this design is usually reserved for the outer layer, where sleeve control is most needed. A functional solution: the three-piece set with elastic cuffs Some modern collections strategically integrate this detail. For example, the JelriSoFit three-piece set , consisting of surgical pajamas, a jacket and pants , includes a jacket with elastic cuffs on the sleeves . This type of set allows: Wear surgical scrubs with complete freedom Add the jacket when extra protection is required Keep sleeves snug without discomfort The design is intended to combine functionality, comfort and a professional image , without resorting to unnecessary elements. Are elastic cuffs comfortable? When well designed, elastic cuffs do not pinch or cause discomfort. The key is: Balanced elasticity Soft and breathable fabrics Good fit without stiffness In quality garments, this detail is integrated naturally and goes unnoticed during work. To conclude Scrubs with elastic cuffs on the sleeves do exist and serve a clear function within the medical environment. This is not a trend, but a practical response to the real demands of clinical work. Choosing garments with this type of design can make a difference in comfort, hygiene, and daily efficiency.

No. Uniforms with metal fasteners are not safe in MRI environments . Even small metal parts, such as zippers, buttons, or snaps, can pose a risk in or near the resonance area. For this reason, in clinical practice, the use of garments with metallic components is strictly limited in resonance areas. Why is MRI so sensitive to metal? Magnetic resonance imaging works using extremely powerful magnetic fields . Any metallic object can: Being attracted by a magnetic field Alter image quality To pose a physical risk to staff and patients The size of the metal does not eliminate the risk. A small metal fastener is still incompatible with this environment. Specific risks of metal closures Metal fasteners on uniforms can cause several resonance problems: Involuntary movement of the garment Heating the metal Distortion of diagnostic images Interruptions in the procedure Therefore, in resonance areas, the tolerance to metal is practically zero. General rules before entering the resonance zone In most clinical settings, clear principles apply: Do not wear clothing with metal parts Avoid metal closures, clasps, buttons, or embellishments. Wear clothing specifically designed for resonance. These measures are not optional; they are part of the area's security protocols. What type of uniforms are most suitable? For work near or within resonance areas, uniforms must include: Completely metal-free design Alternative closures such as plastic buttons or elastic bands Durable and easy-to-wash fabrics Functional cuts that do not require hardware Simplicity in design is a key advantage in these types of environments. Functional design and safety can coexist Currently, there are medical uniforms specifically designed for sensitive environments , where safety is a priority without sacrificing comfort or professional image. JelriSoFit collections incorporate designs without metal components, designed to meet the demands of areas such as MRI, offering comfortable, durable fabrics suitable for daily work in clinics and hospitals. To conclude In magnetic resonance imaging, safety always takes precedence over aesthetics or convenience . Metal closures, however small they may seem, are not compatible with this environment. Choosing metal-free uniforms is a responsible decision that protects both healthcare staff and patients.

In daily practice, surgical pajamas made of blended fabric (cotton + polyester) are usually the best option. This type of fabric combines the comfort of cotton with the strength of polyester, achieving a balance more suitable for the actual pace of medical work. Neither pure cotton nor pure polyester usually meet all the needs of healthcare personnel when used for long periods. Cotton: comfortable, but with limitations Cotton is known for its softness and good breathability, which is why many traditional surgical scrubs use it. Advantages of cotton: Soft feel upon contact with the skin Good sweat absorption Lower risk of irritation Limitations in the medical environment: It wrinkles easily It takes longer to dry It loses its shape after many washes It may look sloppy at the end of the day For long shifts or frequent washing, these disadvantages become apparent. Polyester: durable, but less breathable Polyester is widely used in uniforms because of its durability. Advantages of polyester: High wear resistance It holds its shape better It dries quickly Fewer wrinkles Most common disadvantages: Reduced breathability Feeling of heat on intense days Moisture accumulation if the design is inadequate That's why many professionals feel that polyester scrubs "make you hotter". Why is blended fabric the best option? Cotton + polyester surgical pajamas take advantage of the best of both materials. This type of fabric allows: Greater comfort during working hours Improved air circulation Fewer wrinkles and a better appearance Faster drying after washing Greater uniform durability For healthcare workers who need to move around constantly, this combination is more functional and practical. The importance of design and fabric quality It's not just the material that matters, but how the uniform is made . A good scrub blends quality fibers with a design intended for movement and ventilation. JelriSoFit surgical scrubs use selected blended fabrics to offer a balance between comfort, durability and ease of care, helping to maintain a professional appearance even after demanding days and frequent washing. So, which one should you choose? For occasional use, cotton may be sufficient. For those who work long hours, move around constantly, and wash their uniforms frequently, blended fabric is the most complete and functional option . Choosing the right surgical scrubs is not just a matter of comfort, it's also a practical decision for everyday professional life.

Polyester scrubs can make you sweat more because this material does not absorb moisture naturally and, depending on its quality and construction, can limit body ventilation during long, active days. Understanding how the tissue works helps to identify why that sensation of heat appears and how to reduce it in the healthcare environment. How polyester behaves in response to sweat Polyester is a synthetic fiber known for its strength and durability, qualities highly valued in medical uniforms. However, unlike other fibers, it does not absorb sweat; instead, it tends to retain moisture on the skin's surface. When the fabric does not allow proper heat dissipation, the body responds by increasing perspiration, which generates a feeling of sultriness and moisture buildup. Why some polyester scrubs are hotter Not all polyester scrubs behave the same. The feeling of excessive sweating is usually related to several factors combined: Fabrics that are too dense or closed Lack of breathable structure Lack of humidity management technologies Tight cuts that restrict airflow In clinical environments with constant movement, these factors intensify and directly affect comfort during the workday. The difference between basic polyester and technical fabrics There is an important difference between standard polyester and technical polyester designed for medical use. Technical fabrics may incorporate: Structures that facilitate ventilation Finishes that help disperse moisture Elasticity that improves mobility Greater lightness without losing strength Therefore, the problem is not usually polyester itself, but how it is used within the medical uniform. The impact of design on thermal sensation Besides the fabric, the design of the scrub significantly influences how warm it feels. Elements such as: The width of the cut Areas of highest perspiration Freedom of movement They can make the difference between a uniform that feels suffocating and one that keeps up with the real pace of healthcare work. How to reduce the feeling of sweat in polyester scrubs For daily use in a medical setting, it is advisable to look for scrubs that: Use technical blends instead of rigid polyester. They are designed for long days Offer a balance between breathability and durability Maintain their performance after frequent washings Brands specializing in medical uniforms develop their garments taking these real needs into account. In proposals like those from JelriSoFit, scrubs are designed with lighter technical fabrics and functional cuts, intended to improve ventilation and reduce the feeling of heat without sacrificing resistance or a professional image. In summary Polyester scrubs can cause increased sweating when the fabric and design are not optimized for medical work. Choosing uniforms with appropriate technical materials and a functional design reduces thermal discomfort and allows you to face the workday with greater comfort.

The difference between fluid-resistant fabric and water-repellent fabric lies in their level of protection and how they interact with liquids. Although both materials reduce absorption, they don't offer the same performance or the same degree of safety, especially in medical settings. Understanding this difference helps in choosing a medical uniform that is more suitable for daily work. What is fluid-resistant fabric? Fluid-resistant fabric is designed to prevent liquids from penetrating the fabric for a specific period. Its structure and finish allow fluids to remain on the surface, facilitating cleaning without soaking through the garment. In the healthcare sector, this type of fabric is common in medical uniforms because: Reduce direct contact with liquids Facilitates immediate cleaning It offers an additional layer of protection throughout the day It maintains its functionality after frequent washings The fluid-resistant fabric is designed for situations of more constant contact with fluids, common in clinical work. What does it mean for a fabric to be water-repellent? Water-repellent fabric has a surface treatment that causes liquid to slide off or form droplets, preventing immediate absorption. However, this effect is primarily superficial and temporary. Its main features include: Light splash protection Greater breathability in some cases A feeling of lightness in daily use This type of fabric works well for short exposures, but it is not designed to withstand prolonged contact with liquids. Key difference between fluid-resistant and water-repellent fabric The main difference lies in the level of resistance and duration of protection: The fluid-resistant fabric offers a more stable barrier against liquids. The water-repellent fabric acts as a surface protection The fluid-resistant material maintains its function better with continuous use. The repellent may lose effectiveness over time and with washing. In environments where exposure to fluids is frequent, this difference becomes especially relevant. Which one is more suitable for a medical uniform? For daily use in healthcare settings, fluid-resistant fabric is often the most reliable option. It provides greater peace of mind during long shifts and better meets the real demands of clinical work. Water-repellent fabric may be sufficient in contexts with less contact with liquids, where lightness and comfort are prioritized. That's why many healthcare professionals opt for medical uniforms that combine fluid-resistant protection with good breathability, achieving a balance between safety and comfort. The importance of choosing fabrics designed for healthcare work Not all specially treated fabrics perform the same in everyday use. In products like JelriSoFit, the selection of materials focuses on durability, ease of care, and functional protection—key aspects for medical uniforms that are used intensively. Choosing the right fabric helps maintain a consistent professional image and allows you to work with greater confidence. In summary Fluid-resistant fabric and water-repellent fabric are not the same. While one offers more complete protection against liquids, the other acts as a light, superficial barrier. Understanding this difference allows for more informed decisions when choosing medical uniforms suitable for the demands of a healthcare environment.